Click on the image to check the artwork
The high performance flange mounted differential pressure transmitter models EJA210A and 220A can be used to measure levels of densities of solidifying or precipitating liquids. Both output a 4 to 20 mA DC signal corresponding to the measured differential pressure.
The EJA Series is available with BRAIN, HART, FOUNDATION™ fieldbus or PROFIBUS PA communication protocols.
Specifications
|
EJA210A / EJA220A |
||
|
M Capsule |
H Capsule |
|
|
Range |
-100 to 100 kPa |
-500 to 500 kPa |
|
Span |
1 to 100 kPa |
5 to 500 kPa |
|
Accuracy |
±0.2% |
±0.2% |
|
Degrees of protection |
IP67, NEMA 4X, and JIS C0920 immersion proof |
|
|
Certificates |
FM, CENELEC ATEX, CSA, IECEx |
|
|
Output |
4 to 20 mA DC or FOUNDATION™ fieldbus or PROFIBUS PA 2-wire system with digital communication |
|
|
Supply voltage |
BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) |
|
|
Ambient temperature |
-40 to 85 deg C (-40 to 185 deg F) (general use type) |
|
|
Process temperature |
-40 to 120 deg C (-40 to 248 deg F) (general use type) |
|
|
Maximum working pressure |
Flange rating pressure |
|
|
Mounting |
Flange mounting |
|
|
Process flange size |
EJA210A: 3-inch (80mm), 2-inch (50mm) |
|
|
Diaphragm material |
SUS316L, Hastelloy C-276, Tantalum |
|
|
Process flange material |
S25C, SUS304, SUS316 |
|
|
Housing |
Cast aluminum alloy or SUS316 equivalent stainless steel (optional |
|
www.chinaguiding.com/